Top-rated independent heating and cooling across Tampa Bay and Florida's Gulf Coast

Gas Furnace Repair in Orlando, FL

If you smell gas, get everyone out of the house first, then call 911 or your gas utility from outside, and call us after that. With the safety part handled, gas furnace repair in Orlando is usually about ignition, flame sensing, a failed inducer, or a blower that spins but never gets hot air to the vents. We open the cabinet, test the sequence of operation, and show you the part that quit. Reach us by phone or through the quote form to book the visit.

Call (888) 365-6280

A real person answers
Open 7 days
Written quote before work starts

Taking calls until 5:00 PM ET

Every major brand, one numberCarrier Trane Lennox Goodman Rheem York American Standard Bryant

The symptoms that lead here in Orlando

I hear a click and then nothing happens Ignition or control circuit fault, bad transformer, or a thermostat signal not reaching the board
There is a burning smell when the heat comes on Dust burn-off, a restricted filter, or an electrical problem in the blower or heat strips
The heat just quit overnight Failed ignitor, tripped safety limit or a lockout at the control board

How We Decide Repair Is The Right Call

Age, the part that failed, and how the rest of the furnace looks. A flame sensor or igniter on an otherwise sound unit is a straightforward repair and we do it that day when we have the part. A cracked heat exchanger is different, because that is a combustion safety issue and patching it is not an option. When a furnace is well past its expected service life and needs a major component, we lay out repair against replacement with real numbers and let you choose. We do not push either direction.

What Gas Furnace Repair Actually Involves

A gas furnace has to prove itself safe before it makes heat, and most no-heat calls come down to one step in that sequence failing. We follow the startup from the thermostat call through the inducer, the ignition attempt, the flame signal, and the blower handoff, watching where it stops. That tells us whether we are looking at an ignition part, a safety switch doing its job, or a control board that has lost its mind. We repair heating systems that snowbird homeowners run only a few weeks a year, so dust and sitting time matter too.

Orlando coverage

From Orlando we also cover Winter Park, Kissimmee, Apopka, Oviedo, Sanford, Altamonte Springs, Lake Mary, Clermont and St. Cloud.

32816
32817
32818
32819
32820
32821
32822
32824

Related furnace repair work in Orlando

All furnace repair in Orlando → · Gas Furnace Repair across the region →

What you get on every job

You approve a written quote first

Covering 75 cities across Florida, Georgia.

You reach a person, not a menu

Open 7 days, 8:00 AM to 5:00 PM ET.

Every major brand, gas and electric

Carrier, Trane, Lennox, Goodman and more. We are not an authorized dealer for any of them.

Gas Furnace Repair in Orlando — quick answers

My gas furnace lights, then shuts off after a minute. Why?

That pattern usually points to a flame sensor that is dirty or failing, or a safety switch opening once combustion starts. The furnace is protecting itself. It needs a technician, not a reset, because repeated lockouts stress the gas valve.

Is a booming sound at startup something to worry about?

Yes, get it looked at. A delayed ignition boom means gas is building before it lights, which stresses the heat exchanger. Stop using the heat and call us. If you smell gas, leave the building and call 911 or your gas utility first.

How soon can you get to my Orlando home?

Call us with your address and a short description of the symptom and we will give you a realistic window rather than a vague promise. Summer afternoons in Orlando are the busiest stretch of our week, so mornings and early in the week are usually easier to book. If your system is off entirely and the house is climbing, say so when you call and we will treat it that way.

How it works

Step 1
Tell us the symptom
Call or fill out the quote form and describe what changed. Warm air, short cycling, a clicking outdoor unit, water on the floor. Details help us load the right parts before we drive out.
Step 2
We diagnose on site
A technician checks the thermostat, airflow, electrical side, refrigerant behavior, and the coil. Coils foul fast in coastal air, so we look there early. You get the finding in plain language before work starts.
Step 3
Repair and verify
We make the repair, then run the system and watch it. Supply temperature, drain flow, amp draw, and how the house actually feels. If the fix needs a follow-up part, we tell you that day.

Call (888) 365-6280

A real person answers
Open 7 days
Written quote before work starts

Why homeowners call us

Humidity gets equal weightCold air alone is not comfort. On slab homes and older condos, a system can hit temperature and still leave the rooms clammy. We look at run time, airflow, and drainage so the house dries out instead of just chilling.
Coastal wear is expectedSalt air chews condenser fins and contactors. We check for corrosion, weak capacitors, and fouled coils as part of the diagnosis, because in this region those are causes rather than afterthoughts.
Heat gets attention tooFurnace repair, heat pump reversing valve trouble, and heat strip failures all come through in the cooler months. Georgia homes lean on heat harder than Florida homes, and we service both ends of the region.
No mystery invoicesYou hear what failed, what it takes to fix, and what we found nearby that may fail next. If a repair does not make sense on an old system, we say so instead of stacking parts on it.
All major brands, gas & electricCarrier, Trane, Lennox, Goodman, Rheem, York and more, as an independent company.
Straight answersIf a system is not worth repairing, we say so, often right on the phone.